NFG0QHB372HS2D

Murata Electronics
81-NFG0QHB372HS2D
NFG0QHB372HS2D

Mfr.:

คำอธิบาย:

เอกสารข้อมูลสินค้า:
โมเดล ECAD:
ดาวน์โหลด Library Loader ได้ฟรีเพื่อแปลงไฟล์นี้สำหรับเครื่องมือ ECAD ของคุณ เรียนรู้เพิ่มเติมเกี่ยวกับโมเดล ECAD

มีอยู่ในสต็อก: 69,326

สต็อก:
69,326 สามารถจัดส่งได้ทันที
ระยะเวลารอสินค้าจากโรงงาน:
14 สัปดาห์ เวลาการผลิตของโรงงานโดยประมาณสำหรับปริมาณที่มากกว่าที่แสดงไว้
จำนวนขั้นต่ำ: 1   หลายรายการ: 1
หน่วยราคา:
฿-.--
ต่อ ราคา:
฿-.--
โดยประมาณ ภาษีศุลกากร:
การบรรจุ:
ม้วน แบบเต็ม (สั่งซื้อ 15000 จำนวนหลายชิ้น)

การตั้งราคา (THB)

จำนวน หน่วยราคา
ต่อ ราคา
เทปตัด / MouseReel™
฿6.13 ฿6.13
฿5.12 ฿51.20
฿4.47 ฿111.75
฿4.22 ฿422.00
฿3.68 ฿920.00
฿3.42 ฿3,420.00
฿3.24 ฿8,100.00
฿3.03 ฿15,150.00
฿2.78 ฿27,800.00
ม้วน แบบเต็ม (สั่งซื้อ 15000 จำนวนหลายชิ้น)
฿2.78 ฿41,700.00
† จะมีการคำนวณและเพิ่มค่าธรรมเนียม MouseReel™ จำนวน ฿230.00 ในรถเข็นสินค้าของคุณ ผลิตภัณฑ์ MouseReel™ ทุกรายการไม่สามารถยกเลิกการสั่งซื้อและคืนสินค้าได้

แอตทริบิวต์ผลิตภัณฑ์ ค่าแอตทริบิวต์ เลือกแอตทริบิวต์
Murata
ประเภทสินค้า: โช้ค / ฟิลเตอร์ โหมดร่วม
มาตรฐาน RoHS:  
NFG0QHB
PCB Mount
SMD/SMT
1 Channel
9 Ohms
100 mA
1.9 Ohms
- 40 C
+ 85 C
0.65 mm
0.5 mm
Reel
Cut Tape
MouseReel
Noise Filters
เครื่องหมายการค้า: Murata Electronics
ประเทศแหล่งประกอบ: Not Available
ประเทศแหล่งกระจาย: Not Available
ประเทศถิ่นกําเนิด: JP
ประเภทสินค้า: Common Mode Chokes
ระบบป้องกัน: Unshielded
จำนวนต่อหีบห่อที่ผลิตจากโรงงาน: 15000
หมวดหมู่ย่อย: Inductors, Chokes & Coils
การทดสอบความถี่: 100 MHz
น้ำหนักต่อหน่วย: 78.160 mg
ผลิตภัณฑ์ที่พบ:
เลือกกล่องทำเครื่องหมายอย่างน้อยหนึ่งรายการเพื่อแสดงผลิตภัณฑ์ที่คล้ายกัน
เลือกกล่องทำเครื่องหมายด้านบนอย่างน้อยหนึ่งรายการเพื่อแสดงผลิตภัณฑ์ที่คล้ายกันในหมวดหมู่นี้
แอตทริบิวต์ที่เลือก: 0

CNHTS:
8504500000
CAHTS:
8548000000
USHTS:
8548000000
JPHTS:
854800000
ECCN:
EAR99

ตัวกรองสัญญาณรบกวนโหมดปกติ NFG

ตัวกรองสัญญาณรบกวนโหมดปกติ NFG ของ Murata Electronics นำเสนออัตรากระแสไฟ 100mA ช่วงการสูญเสียการแทรก 19 ถึง 29dB และความต้านทานของฉนวน 10MΩ ซีรี่ส์ NFG สามารถใช้งานร่วมกับ MIPI C-PHY ที่มีความเร็วสูง ความจุสูง และมาตรฐานการส่งข้อมูลแบบใหม่ ตัวกรองสัญญาณรบกวนโหมดปกติ NFG ของ Murata Electronics เหมาะสำหรับการใช้งานกับพีซี โทรศัพท์มือถือ และกล้องถ่ายภาพนิ่ง/วิดีโอ

EMI Noise Suppression

Noise suppression has become an important issue, especially regarding electromagnetic interference (EMI) and electromagnetic compatibility (EMC). Murata provides engineers with complete support, including products and design-simulation software solutions based on expertise achieved through extensive on-site experience. This enables Murata to provide noise suppression solutions for a broad array of applications.

Noise Suppression for USB 4

Universal Serial Bus (USB) is used worldwide as a differential interface standard for data transmission primarily between hosts, such as computers, and devices. The requirements for high-capacity data transmission over high-speed communication routes and the integration of various existing differential interface standards in the market led to the development of a new USB 4 standard in September 2019. USB 4 is expected to become widely adopted in computers and their peripherals in the coming years. Murata researched noise issues with USB communication and ways to counter that noise.

WE-CMB Common Mode Power Line Inductors (Chokes)

Würth Elektronik WE-CMB Common Mode Power Line Inductors (Chokes) feature a compact design that delivers high suppression of asymmetric interferences, even at low-frequency ranges. In addition, these inductors provide broadband screening due to a low capacitance winding technique. Würth Elektronik WE-CMB Common Mode, Power Line Inductors, are ideal for power electronics and suppressing common-mode noises. Parasitics can have a significant effect on the noise attenuation and current rating of a common mode filter. Würth designed the WE-CMB series for minimal parasitic effects over its useful frequency bandwidth so it does what it is designed to do - get rid of the noise.